Mach II fan speed ?

[Lee]

Can anyone tell me if there is a way to set the fans to run at full speed all the time, instead of setting them each time in the mach software?

Thanks again for any help.

 

[maverik-sg1]

I had this problem, found out that I needed to format the drive and re-install windows - when I did I had full control again.

Cheers

Mav

 

[GoLLuM4444]

If you don't run the control center on startup it won't set them back to default on startup.

 

[Lee]

If you don't run the control center on startup it won't set them back to default on startup.

Thanks mate, just found that out about 20 mins ago, i was just going to test that out but you have confirmed it for me.

Cheers.

 

[PiNhEaD]

i hears ur not supposed to run it pluged into ur mobo all the time cos u can get corruption.......i just set mine to boot @ -40 turned the fans to turbo then manual and moved em the rest of the way [turbo is not quite full speed] and then unplug from mobo and it stay set like that.......

 

[fatty]

If you are running a r507 unit you need turbo or above

 

[welshtom]

If you are running a r507 unit you need turbo or above

What damage will it do running it below turbo?

Tom

 

[SAS91]

Well think of burning.

 

[welshtom]

*Turns fans to turbo*

 

[fatty]

it will over heat your compressor it should shut the system down if not it will do damge