M8tRiX IS A DUMB ASS

[M8tRiX]

Hi All,

You guessed it from the title of this post, i am a dumb ass.

Basically i was getting baffled why i could get past HTT 275 x 11 without the system complaining.

System Specs:

FX55 @ 275 x 11 HT x 3 memory (GSkill 2.5-4-4-8 @ 2.8v)

Until i looked at the following memory settings

Memory running 1:1 @ 275 x 11 2.5-4-4-8 @ 1T 2.8v.

You see the problem i had, YES i was trying to run the memory at a CMD 1T not 2T CMD, so a quick change in settings and guess yes you guessed i am now running memtest error free.

btw i will post the link to OCZ's version of memtest later, the difference between the standard memtest & the OCZ memtest is that you can change the memory timings within memtest with out going into the bios first How Cool is that.

Anyway the memory passed 26 tests @ DDR550 WooHoo baby.

L8tr peeps,

M8tRiX

 

[Warlord Shigs]

Hi All,

You guessed it from the title of this post, i am a dumb ass.

Basically i was getting baffled why i could get past HTT 275 x 11 without the system complaining.

System Specs:

FX55 @ 275 x 11 HT x 3 memory (GSkill 2.5-4-4-8 @ 2.8v)

Until i looked at the following memory settings

Memory running 1:1 @ 275 x 11 2.5-4-4-8 @ 1T 2.8v.

You see the problem i had, YES i was trying to run the memory at a CMD 1T not 2T CMD, so a quick change in settings and guess yes you guessed i am now running memtest error free.

btw i will post the link to OCZ's version of memtest later, the difference between the standard memtest & the OCZ memtest is that you can change the memory timings within memtest with out going into the bios first How Cool is that.

Anyway the memory passed 26 tests @ DDR550 WooHoo baby.

L8tr peeps,

M8tRiX

mate u should run 1t, cmd 2t come with a MASSIVE performace hit, its jus not worth runnin 2t timins at all. lower your overclock if u must 2 run 1t..... also shouldnt ur ram be doin that fsb at ease with 2.5-3-3-10 timins

 

[fatty]

hmmm I found with my ocz4200 if I am running slower than 240 the mem dont like 1t but over 240 its 1t all the time??

 

[M8tRiX]

mate u should run 1t, cmd 2t come with a MASSIVE performace hit, its jus not worth runnin 2t timins at all. lower your overclock if u must 2 run 1t..... also shouldnt ur ram be doin that fsb at ease with 2.5-3-3-10 timins

Hi Shigs,

Aye looked at different timings and i am now at 310 x 10, going to leave it now running OCZ's Memtest86 overnight.

I hope you don't mind i have added you too my msn messenger, just incase i need your advice.

Thnaks Again,

M8tRiX

 

[Warlord Shigs]

Hi Shigs,

Aye looked at different timings and i am now at 310 x 10, going to leave it now running OCZ's Memtest86 overnight.

I hope you don't mind i have added you too my msn messenger, just incase i need your advice.

Thnaks Again,

M8tRiX

nps mate