Xenomorphical
New member
So i got a Logitech G710+ from the USA a while ago (i wanted the USA layout) and decided to do a little test / mod with it.
The project was to turn the background from black to white to get more of a white glow around the buttons than in it's stock state.
Below are some pics of this as well as some before / after shots.
Stock out of the box.
Front plate off.
I made simple paper strips that hook under each button's side tabs.
Long ones go across over the short ones, slowly turning the black background into white.
A closeup.
A after / before pic, mind the bad camera quality but the difference is there.
As you can clearly see here as wel.
More closeups.
The desired effect i wantted that was the inspiration for this project comes from a CM Storm Octane set my girlfriend uses
Let me know what you guys think of this mod
The project was to turn the background from black to white to get more of a white glow around the buttons than in it's stock state.
Below are some pics of this as well as some before / after shots.

Stock out of the box.

Front plate off.

I made simple paper strips that hook under each button's side tabs.

Long ones go across over the short ones, slowly turning the black background into white.

A closeup.

A after / before pic, mind the bad camera quality but the difference is there.

As you can clearly see here as wel.

More closeups.


The desired effect i wantted that was the inspiration for this project comes from a CM Storm Octane set my girlfriend uses

Let me know what you guys think of this mod
