Intel Officially Releases Devil's Canyon, Haswell Refresh

WYP

News Guru
Back in March, we learned that Intel were planning to release a new Haswell refresh processor which targeted the overclocking and gaming markets in a big way.

Code named Devil's Canyon, this new version of the existing Haswell processors will include new CPU packaging and the requested improved thermal interface material (TIM). What wasn't known were the final clock speeds and when these CPUs will be made available

slides01.jpg


The new Core i7-4790K processor will ship with a 4.0 GHz base clock with a maximum Turbo clock rate of 4.4 GHz, which to put it into perspective is a boost clock only 100MHz less than my 4670K's day to day overclock.

This boost of 500 MHz in base clock speed over the Core i7-4770K should result in a substantial (~10-15%) performance increase. The processor still supports HyperThreading for a total of 8 threads and is fully unlocked for even more clock speed improvements. Hopefully the Devils overclocking will be equally as impressive.

slides04.jpg


All of the other specifications remain the same, Intels HD Graphics 4600 remains identical to vanilla Haswell with the same 8MB of L3 cache, 16 lanes of PCI Express, etc, etc.

slides13.jpg


Intel spent a great deal of time on the Devil's Canyon to improve the packaging and thermals for overclockers and enthusiasts. The thermal interface material (TIM) that is between the top of the die and the heat spreader has been updated to a next-generation polymer TIM (NGPTIM).

The change should improve cooling performance of all currently shipping cooling solutions (air or liquid) but it is still a question just HOW MUCH this change will actually matter, will this do much to positively affect overclocking?

You can tell from the photo above that Intel has added capacitors to the back of the processor to "smooth" power delivery. This, combined with the NGPTIM should enable a bit more headroom for clock speeds with the Core i7-4790K, hopefully we will see the affects of these changes when OC3D get a few samples.

slides08.jpg


In fact, there are two Devil's Canyon processors being launched this month. The Core i7-4790K will retail for $339, the same price as the Core i7-4770K, while the Core i5-4690K will sell for $242, the same price as the 4670K.

The lower end i5 is a 3.5 GHz base clock, 3.9 GHz Turbo clock quad-core CPU without HyperThreading. While a nice step over the Core i5-4670K, it's only 100 MHz faster. Clearly the Core i7-4790K is the part everyone is looking for, but overclocking on the i5 variant should still be interesting.

slides07.jpg


Not to be left out, Intel is offering an unlocked Pentium processor for users on a tight budget. This dual core CPU runs at 3.2 GHz base frequency and includes not just HD Graphics but now supports Intel's QuickSync video.

slides09.jpg


Did i say that the Pentium G3250 is unlocked? Those looking for a budget gaming overclocker from the Intel camp may have found the right CPU. The old days of the Intel overclocked dual core have returned!

Devil's Canyon promises a lot, greatly improved clock speeds for the high end 4790K and improved overclocking across the range. When samples reach Tom's door we will see for ourselves how much these improvements bear fruit, hopefully these are the overclockers we have been looking for.

Source - Techspot
 
I wonder if people will finally be able to get 5Ghz from a Haswell CPU without pushing the volts and temps to high.
 
Cause they have the money to spare ;) But probably because they were looking out for us and wanted to ensure that we had an accessible GPU to aid in diagnosis I.E when our OC'd dedicated GPU goes to take a nap and doesnt give us an absolute reason why. (highly unlikely)

Gonna need to see how good that NGPTIM , might grab myself a 4820k to replace my trusty 2600k. Should definately expect it to be better than the method they used for the IB and Haswell CPU's...

Cheap intel six core here I may come.
 
Last edited:
Why the heck would they put the stupid iGPU on a chip made for overclocking.

not everyone that need stellar cpu performance requires a lot of GPU performance, also the 500MHz boost may tempt some non-overclockers to the 4790k.

With this CPU it would either be lazer it off or keep the iGPU as it is, so why lazer it off if it works.
 
Wouldn't it make sense to remove the IGPU for the K series chips. This way you dont have the heataof the IGPU and the extra power drain of the IGPU which would increase the overclocks?
 
The unlocked Pentium look very interesting to me... is it basically a hazwell i3 without hyper threading or is the architecture completely different..?
 
This is just a refresh. I was expecting more from the top of the line haswell replacement - Devil's Canyon.

It was always supposed to be a refresh. No idea why you expected more. It has been known for a while that skylake will be the next tock, nothing else.
 
Consistency

So I assume they will run on current LGA 1150 motherboards, right?

I may consider to upgrade my current 4770k which only stabilizes at 4.1GHz and 1.275 vcore voltage. (yes I have good cooling: corsair h110 and asus VI hero as mobo)

Guess I will wait to see if these chips' "overclockability" will be more consistent than the 4770k ones. Cause I'm really unlucky with the chips.

Cheers!
 
This is just a refresh. I was expecting more from the top of the line haswell replacement - Devil's Canyon.

I wouldn't consider a 500MHz bump from the 4790K small, usually a refresh is only around 100-200MHz. And then there is the thermal compound etc to consider.
 
So are these compatable with z87 boards? I've heard yes and no?

I have asrock extreme3 z87, got it cheap as chips (£40). Have a 4570k in it, but wouldn't mind the 4790k if it works!
 
Asus have released a bios update for some boards to take the "Devils Canyon" cpus but I am not sure which boards and if, other manufacturers are also going to do the same.
 
Back
Top