E6600 week 24 under Phase

[fatty]

Well after the vdroop and vcore mods now at 1.75v

 

[fatty]

4.1 gig

 

[fatty]

But I am going to run it in at 500 x 8 1.7

 

[bazx]

it must be hard with such low multi to work with

whats ya load temp

 

[fatty]

on my evap around -38 on the mobo around -26 with my chilly1 headed mach2 507 I have heavily charged it for high load I can get 4.2 - 4.4 on the x6800 which runs real hot

I havent stuck it under the cascade with the volt mods done yet I'm thinking 4.4 ??

 

[fatty]

Pic of the vcore and vdroop mods

 

[maverik-sg1]

Grreat results wringing the neck of that cpu good and proper

I put another layer of armaflex round the cpu so that the neopreneiss proud of the caps and teh CPU arm is covered/sealed.

Is that dileccie on the metal mate?

Any tips for this type of mounting?

Mav

 

[fatty]

I will slap a rough guide together as I have had a few people asking

 

[steve101101]

Has it been easy controlling condensation and stability at that overclock with a phase change??

 

[fatty]

As I said in your other post I have only ever lost 1 mobo in about 4-5 years of phase usage

 

[steve101101]

Ok thanks