Dumo's Yellow Box by PC-Ice @ -110C

[dumo]

Still tuning and will do load test with FX55 130nm....Don't mind the "NYC's taxi cab yellow"...as long as it can give my 57 its needed jolt of cold then is good

Check this out....http://www.ocxtreme.org/forumenus/showthread.php?t=625&page=1

 

[dumo]

Still tuning and will do load test with FX55 130nm....Don't mind the "NYC's taxi cab yellow"...

This is the wrap up before finished packing and on the way to NYC...

My FX57 will like it...I hope. If not then FX55 130nm 0442 will carry the task

 

[Gray Mole]

Ice's Cascades are pretty impressive, and this is no exception!

Bet you're just itching to freeze your '57

Sure hope you don't have any cold issues with it, but with a good '55 as backup, you'll still have some fun

America seems to be the land of Cascades at the minute, need to give our local guys a 'push' in that direction I guess lol

Really nice looking work, but I'd expect no less from PC-Ice

Gray

 

[nick25]

Nice and portable Looking forward to seeing the results.

 

[dumo]

Ice's Cascades are pretty impressive, and this is no exception!

Bet you're just itching to freeze your '57

Sure hope you don't have any cold issues with it, but with a good '55 as backup, you'll still have some fun

America seems to be the land of Cascades at the minute, need to give our local guys a 'push' in that direction I guess lol

Really nice looking work, but I'd expect no less from PC-Ice

Gray

Thanks Gray, I'm pretty sure it will be a lot to come...

 

[K404]

Thats one of the first cascades i`ve ever seen about sums it up! It looks the part, without a doubt! Whats the noise lke, and how heavy is it???!?



Kenny

 

[stocky]

Looking good

Can't wait to see the results! I wish I had the equipment to build my own units

 

[PHILIP1193]

how much that cost in ££££ mate also looking amazing

Phil

 

[imported_mrbios]

im also very interested in how much this is costing you? im guessing its a 4 figure job?

 

[maverik-sg1]

Yeah looks good, very good.

How much is it?

What sort of condensation protection do you need to run such a beast?

How much noise does it generate?

Does it come in any other colour?

The Coach

 

[GoLLuM4444]

Same questions as Mav really. Except add to the list: Can I borrow it?

 

[Gray Mole]

The condensation is massive compared to single phase. Worse than dry ice. You need to use conformal coating, dielectric, and foam everywhere 'round the target.

I've been watching Ice's cascades for a while and they are awesome.

Eshbach's does around -102 at low load, and when you hit it with a load it actually goes down to -103! He's a master of tuning captube, and his cascades are all cap tuned as far as I know.

For prices you should be asking PC Ice though, it's not really cool to go 'round talking numbers in case there's a price increase, or what you want is different than what someone else wanted, and you're saying 'why is his price cheaper' and all that.

I've been thinking about it myself, but it's the shipping and what if's of getting it from the US to UK.

Gray

 

[K404]

Ever thought you need to start playing the Lottery?

 

[dumo]

Looking good

Can't wait to see the results! I wish I had the equipment to build my own units

I hope this 57 mem. cont. will get used to cold...up, up a bit and start benching Heres @ 1.75V...

 

[hardw1re]

wow. what sort of qualifications have you goto have to be able to build these units personally??

 

[Rockindaveuk]

Looks very impressive. PC Ice certainly has a good reputation for builing among the best cascades.

Looking forward to some benchin results

 

[GoLLuM4444]

I hope this 57 mem. cont. will get used to cold...up, up a bit and start benching Heres @ 1.75V...

No offence mate but I'll bet that's not bench stable. I can get a cpuz verification at nearly 3.8 on phase. Most of the people using cascades seem to bench closer to 3.6 (which i do on phase too ).

 

[dumo]

No offence mate but I'll bet that's not bench stable. I can get a cpuz verification at nearly 3.8 on phase. Most of the people using cascades seem to bench closer to 3.6 (which i do on phase too ).

You're right GoLLuM...Still try to find the magic combo of vcore/temp/htt X multi.... I can bench stable @3.8Ghz no problem, but with low htt...and it wont go near your 3d mark scores..

 

[GoLLuM4444]

Yeah that's obviously quite good - I can superpi 1M at only about 3.62 on phase.

 

[hardw1re]

havent gone all the way through the article yet but i plan to finish reading this site on how to overclock AMD 64's.

http://www.madshrimps.be/?action=gethowto&number=1&howtopage=141&howtoID=58

might hellp you out with finding the perfect solution