Case that fits two 360's?

[Rich_]

Anything out there that fits two 360 rads without cutting or drilling, and preferably under the 250~$ price range?

Or alternatively, what kind of radiators does the switch 810 fit, internally only, without any modifications?

 

[NeverBackDown]

Switch can fit 360/420 in the roof, and a 240/280 in the bottom or front. Each can be 80mm thick with push pull but in the top its push or pull

 

[Dario_92]

The BitFenix Shinobi can have a 360 in the top and a 360 in the front

 

[Rich_]

Switch can fit 360/420 in the roof, and a 240/280 in the bottom or front. Each can be 80mm thick with push pull but in the top its push or pull

can the phantom 820 do the push with pull fans under hood on top?

 

[Ray Marree]

The switch 810 and phantom 820 fit the same amount of radiators. They are basically the same case with different plastic outsides.

 

[NeverBackDown]

the 820 is not worth the money at all, stick to the switch or a different/better case if you find one.

 

[airdeano]

if not into hacking up the case, look to the CaseLabs cases.
yes, expensive, yes can hold whatever you can buy (afford) in radiators.
360/420/480 in the roof, 360/420 in the front intake, natively, no dremel needed.
look into the CaseLabs SM8 for a smallish profile or if you need more ST10..
some get intimidated cutting up a $250 case with non-reversable consequences.

 

[Rich_]

how's the 800D? No fans in front?


----- Or the 900D, any eta on release and msrp?

 

[Etlar]

how's the 800D? No fans in front?


----- Or the 900D, any eta on release and msrp?

I do think the NDA is the 28rd feb, so i do think Tinytomlogan is on that case. But you will never now, before it hits the forum and Youtube

 

[jamesriley94]

can the phantom 820 do the push with pull fans under hood on top?

With a 60mm thick rad in the roof of the Switch, you can fit push/pull depending on your motherboard.