Amperage

[Steve-O-]

Quick question for you guys (yes I did my homework first)

Does anyone know how much amperage a Q6700 uses from the PSU? And while we are on the subject, if one 260 Core 216 uses at least 36amp how much more does two use? Also when you OC a CPU or GPU how much more amp do you use? I'm on the verge of buying a new PSU and right now I know that one GPU is 33.6amp, my four fans use 2.08amp(total), I have no idea what my HDD and DVD-RW use, no idea what my soundcard uses, and the most important, the cpu.

Any info is appreciated.

 

[Luigi]

whats the wattage of the PSU you're looking at buying, and your complete system spec?

 

[Steve-O-]

I'm thinking either the 850 modular Corsair or the 950w Corsair. Specs, as usual, are in my profile. Except for 4 Scythe Slipstream 1900rpm fans, and the default NH-D14 fans and one DVD-RW ODD.

EDIT: And 1 1TB WD Caviar Black HDD.

 

[Luigi]

The 750w Corsair you have in your Profile should handle your rig fine, why the need for a change?

 

[Steve-O-]

I'm getting BSOD with no error codes. All I get is *** SYSTEM SHUTDOWN *** HARDWARE FAILURE *** CONTACT HARDWARE VENDOR ***

I've done P95 test, Intel Burn test, checked HDD for bad sectors etc. I don't get them as much or if at all if I unplug my fan controller and one fan. I've done most of the tests, checked each ram module in all slots and etc. If my ram wasn't working right then it would BSOD on the Intel Burn test as I did standard test and a larger one to use more memory.

I've tested both video cards individually in both PCI-e slots with no failing. I've re-installed windows and that only resulted in SLi working properly. If I try to bump up my OC to 3.2, no matter what voltage my BIOS won't even post, it just freezes at the screen showing the P5N-D logo and the options to go to BIOS and to show post details but since it's frozen you can't get into them. You have to manually restart the system and then it will post. But at 3.1ghz it loads windows fine. I have gotten to 3.5ghz with no problem with only 1 video card in. So my last thing to check is if I'm getting enough power...

If you think my PSU is still adequate then can someone please help me figure out how to go to an earlier BIOS version as I updated that trying to get SLi to work properly with no change but when I try to flash to an earlier version it says it doesn't have a valid boot-rom...