Go Back   OC3D Forums > [OC3D] Cooling Forum > Liquid Cooling
Reply
 
Thread Tools Display Modes
 
  #1  
Old 20-02-13, 05:15 PM
neblur neblur is offline
Newbie
 
Join Date: Feb 2013
Posts: 1
Lightbulb Corsair H100i Screws?

Hi there i am going to be building quite a pricy rig in about 8 months and i will hopefully be using the h100i. Now i am aware that they only provide 8 screws for "2" fan's. I am lookign to mount it in a 900d hopefully in push pull so i ordered some screws today and what i want to know is if they will work?

The screws i ordered are http://www.chilledpc.co.uk/shop/prod...oducts_id=2036

Has anyone done a push pull config with a h100i yet? and if so could you link me to some screw's that you can confirm work 100% with the h100i or if the ones i ordered will work

Reply With Quote
  #2  
Old 01-03-13, 12:00 AM
chris_61 chris_61 is offline
Newbie
 
Join Date: Feb 2013
Posts: 8
Quote:
Originally Posted by neblur View Post
Hi there i am going to be building quite a pricy rig in about 8 months and i will hopefully be using the h100i. Now i am aware that they only provide 8 screws for "2" fan's. I am lookign to mount it in a 900d hopefully in push pull so i ordered some screws today and what i want to know is if they will work?

The screws i ordered are http://www.chilledpc.co.uk/shop/prod...oducts_id=2036

Has anyone done a push pull config with a h100i yet? and if so could you link me to some screw's that you can confirm work 100% with the h100i or if the ones i ordered will work
Hi did you try these screws yet? i am also on the same boat and want to do push pull.

Chris.
Reply With Quote
  #3  
Old 01-03-13, 12:23 AM
seumasbeathan seumasbeathan is offline
Banned
 
Join Date: Apr 2012
Location: Isle Of Lewis
Posts: 3,488
You are going to use a H100i in a 900D? That will look stupid IMO

Also, push-pull is pretty pointless
Reply With Quote
  #4  
Old 01-03-13, 12:25 AM
chris_61 chris_61 is offline
Newbie
 
Join Date: Feb 2013
Posts: 8
Quote:
Originally Posted by seumasbeathan View Post
You are going to use a H100i in a 900D? That will look stupid IMO

Also, push-pull is pretty pointless
I have the 800D.
Reply With Quote
  #5  
Old 01-03-13, 12:38 AM
seumasbeathan seumasbeathan is offline
Banned
 
Join Date: Apr 2012
Location: Isle Of Lewis
Posts: 3,488
Quote:
Originally Posted by chris_61 View Post
I have the 800D.
I was referring to the OP
Reply With Quote
  #6  
Old 01-03-13, 07:31 AM
SeekaX SeekaX is offline
OC3D Elite
 
Join Date: Dec 2012
Location: Germany
Posts: 4,757
900d + h100i?
money = wasted
either you go custom loop or you get a different case, it will look completely underspec'd
Reply With Quote
  #7  
Old 01-03-13, 10:39 AM
chris_61 chris_61 is offline
Newbie
 
Join Date: Feb 2013
Posts: 8
Don't take this the wrong way but he didn't ask your opinion on how it will look. Can we get back on topic, Do you know if the screws will fit or not? or where to get 8 of the long screws that corsair provide?
Reply With Quote
  #8  
Old 01-03-13, 11:33 AM
tinytomlogan's Avatar
tinytomlogan tinytomlogan is offline
The Guvnor
 
Join Date: Dec 2007
Location: TTL Towers
Posts: 20,977
two fans stacked will do noting. push pull is meant to be a set of fans on each side.
__________________
If you recommend a product LINK THE REVIEW


Get along or run along. Your choice
Reply With Quote
  #9  
Old 01-03-13, 04:39 PM
chris_61 chris_61 is offline
Newbie
 
Join Date: Feb 2013
Posts: 8
Quote:
Originally Posted by tinytomlogan View Post
two fans stacked will do noting. push pull is meant to be a set of fans on each side.
Who wants to stack the fans? Corsair does not provide long enough screws to do push pull and in the instruction booklet states that in order to do push pull you must buy additional screws on their website, However this is no where to be found.
Reply With Quote
  #10  
Old 01-03-13, 04:46 PM
FTR.4500MHz's Avatar
FTR.4500MHz FTR.4500MHz is offline
OC3D Elite
 
Join Date: Jan 2012
Location: France
Posts: 1,430
For choosing the right screws you'll need to find out which threading was tapped into the h100i (M4, M3, 6-32, etc...).

Then the best lenght for 25mm fans in push/pull (bolted through the case) are 35mm screws. However if 35mm is too long you can always use some washers to avoid hitting the rad fins.

After that its up to you to choose colour, screw head print, shape etc...

I would suggest this:

http://www.specialtech.co.uk/spshop/...pid-14509.html
__________________
Hardware: Shinobi XL w.custom window | Msi Z77A-GD65 | i5 3570k | 8GB Corsair Vengeance 1600MHz | 7970 Lightning BE | AX 850 | SSD's: Samsung 830 128GB , Corsair Force GT 120 GB | HDD: Seagate Barracuda 750 GB | XonarD2X | Edifier S730 | iiyama prolite g2773hs-gb1 |

Watercooling: EK supremacy p/n | EK 7970Ltg. a/n | D5+EK Top | UT60 360 and 240 rads | EK X3 150 res. | Tygon 13/19mm | Bitspower C.fittings |


Reply With Quote
Reply

Tags
corsair h100, h110i, radiator, screw, watercooling

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump










All times are GMT. The time now is 12:32 AM.
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.