Go Back   OC3D Forums > [OC3D] Project Logs & Gallery > Project Logs
Thread Tools Display Modes
Old 16-02-17, 08:53 PM
NoobCase NoobCase is offline
Join Date: Sep 2013
Location: Denmark
Posts: 148
MonoChromatico 3.0 - Modded Praxis Wet Bench [PICTURE HEAVY)


So this is not a continuous build log but rather most of my build crammed in one, as I've been too busy to be posting all steps individually or even taking pictures of all of it. But I'd like to share my build and the process nevertheless.

As with my previous builds I have reused most of the components and only added a new case (the primochill praxis wet bench) and a few bits and bobs needed to make it into a dual loop system.

Originally I had my eyes on the Open bench table but I wanted the base tray to be angled to better show of the hardware which the Open Bench Table wouldn't do unless I did some significant mods to it (most likely out of my skill level anyways) and bought a SFF PSU. Instead I've used the PrimoChill Praxis Wet Bench and ghetto modded and additional 360 rad to the front of it. If anyone from praxis is watching... there is plenty of room for you guys to perhaps add it to the middle tray. But instead of boring you lets get on with the pictures.

First things first... draining the old system

Building the new case

I did a lot of test fitting an measuring.. tedious task but important ones.

Another "mod" I did to the case was bolting a 2.5 HDD cage from a Corsair Air 240 next to the PSU. Saved me the trouble of getting more custom sleeved cables and makes access to the drivers a lot easier. After the front rad has been mounted access to anything on the bottom and was not easy.

Also found a spot for my Aquareo5 LT fan controller. Turns out the somebody tailor made the distance betweenthe cutouts above where the PSU will sit perfect. Couple of washers and MB screws and voila!

Front rad Ghetto Mounted:

It is by no means pretty - but it is on solid and doesn't botch

More pics of fitting the pump/res unti and pass throughs

Repainted a rad black again after I painted it white for a previous build

Redid my radbox as I had extra fittings available this time


Flushing the ZMT tubing from EK.. Forgot that the very first time I used it... required me to take everything apart to clean all blocks and tubes... won't forget that again...

Ready for final assembly


Final shots

Ended up being by far the most extensive modding I've been doing to a case.. well if I can call drilling holes modding...

Hope you guys enjoyed it.. I know I did

A few more random shots here:

Reply With Quote
Old 16-02-17, 09:55 PM
Davva2004's Avatar
Davva2004 Davva2004 is offline
OC3D Crew
Join Date: Dec 2013
Location: Nottingham UK
Posts: 996
That is a very nice build!
Reply With Quote
Old 16-02-17, 10:13 PM
NoobCase NoobCase is offline
Join Date: Sep 2013
Location: Denmark
Posts: 148
Originally Posted by Davva2004 View Post
That is a very nice build!
Thank you Davva2004!
Reply With Quote
Old Yesterday, 12:40 PM
Blade Runner's Avatar
Blade Runner Blade Runner is offline
Advanced Member
Join Date: Oct 2014
Location: UK
Posts: 302
Very clean build.
Reply With Quote
Old Today, 12:12 AM
Excalabur50's Avatar
Excalabur50 Excalabur50 is offline
OC3D Elite
Join Date: Apr 2011
Location: Australia
Posts: 5,140
Nice clean build well done
NZXT Phantom 630 White=Intel 5930K=MSI X99A Gaming Pro Carbon=32gig 3000Mhz Dominator Platinums= MSI GTX980Ti Gaming 6G=Corsair H110i GT=Asus ROG Swift=Corsair K95 RGB=Corsair Force LS 960GB=Cougar 700M=Samsung 950 Pro M.2 512GB=Corsair AX1200i=White Sennheiser Game One=CableMod RGB LED=Pioneer BDR-209D=Windows 10 Pro=Creative Soundblaster ZXR=Thrustmaster T16000M HOTAS
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT. The time now is 03:57 AM.
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.