Go Back   OC3D Forums > [OC3D] General Forums > OC3D Reviews & Videos
Thread Tools Display Modes
Old 14-09-17, 09:28 AM
tinytomlogan's Avatar
tinytomlogan tinytomlogan is offline
The Guvnor
Join Date: Dec 2007
Location: TTL Towers
Posts: 20,318
Originally Posted by Kaapstad View Post
Not always, sometimes I use 4 air cooled cards.

The pic below shows why I don't like the connectors the way they are at the bottom of the motherboard. The board is a Rampage V Edition 10 and as you can see all the connectors are useless except for the 4 pin molex which is turned through 90 degrees.

Asus should turn all the connectors though 90 degrees so they can be used when running 4 cards.

Using NVidia cards is a pain but AMD cards are even worse as they often have less clearance underneath. This is not the card manufacturers fault though, it is very poor motherboard design.
I dont agree. It could cause more issues pointing them down at the bottom, quite a few cases for example would clash with it for starters.

You are very rare in the fact that you buse 4 cards but after having a look at that board myself this morning using the 4th slot, I could get fans and the I/O in easily with only the USB3 being difficult - you can buy an adapter for that though

If you recommend a product LINK THE REVIEW

Get along or run along. Your choice
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT. The time now is 10:57 PM.
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.