Go Back   OC3D Forums > [OC3D] Project Logs & Gallery > Rig Gallery
Reply
 
Thread Tools Display Modes
 
  #1  
Old 19-05-17, 10:49 PM
RyzenMaster's Avatar
RyzenMaster RyzenMaster is offline
Newbie
 
Join Date: May 2017
Location: Vancouver, Wa
Posts: 11
Talking Ryzen 7 RGB With AURA Build



Introduction After years of haphazardly putting random parts together for my computer needs (gaming, graphics design, and video encoding), I felt it was time to start from scratch with all new components. My goals for this build was fast multitasking/encoding with the capability of seamless 1080p gaming.

CPU The R7 1700 is an octo-core processor that utilizes AMD SMT technology for a total of sixteen threads. This model has the best price for performance of the three new processors. Adding a modest overclock of 3.8ghz was easy and I’m sure I will be able to push this little bet of silicon even further. Temps while idle have never gone over 27c. At max load, running Prime95 over 24 hours, the max temps sat around 55c.

Motherboard I’ve always loved the Asus ROG line of products and knew from the beginning that I wanted an ROG themed build. I went with the Crosshair VI for the mobo simply because it is the best and only ROG mobo for AM4. I have had little to know issues with this board and the latest bios has provided excellent stability.

Memory I decided to play it safe with the Adata XPG series of memory. I had no problem running them at rated speeds and timing out of the box and they have benchmarked well. I may upgrade to aura certified ram at some point. (ADATA XPG Z1 16GB (2 x 8G 288-Pin DDR4 3000 Model-AX4U300038G16-DRZ)



Storage My storage setup is a tried and true setup for the budget minded. I chose the Corsair Force MP500 120gb for the boot driver and a Seagate 1tb for data and program storage. My system boots in ten seconds or less and program load times are great.

GPU I thought about going with a GTX 1080, but since my goal was 1080p gaming, I opted for the GTX 1070. The ASUS Strix 1070 is factory overclocked to 1860 OC mode and plays games like Wildlands and Resident evil 7 flawlessly. I may eventually make the move to 4k and when that happens, I think I’m set for a Titan XP or similar.

Case In the spirit of my ROG theme, I opted for the Deepcool Genome ROG Certified edition. It sports Aura compatible RGB leds, a built in 360mm liquid cooling system and side mounted gpu support. Installation was a breeze and the cable management wasn’t bad at all. I did need to install a 200mm fan in the front for better air flow, but it is dust filtered and the front panel wasn’t too difficult to remove. The RGB strips all worked flawlessly with the AURA software and look amazing. I also decided to add a custom ROG fan grill to the rear exhaust. (Pictured below)

PSU The power supply I chose is the corsair 750 watt 80Plus Platinum. I found it refurbished on Newegg and decided to plat the referb lottery. I totally won with this buy. With corsair link I can monitor my power draw and system stability. A great find and a great value. (Corsair HX750i). The cables look nice once in place, but they are unforgiving and hard to work with. I’m thinking I will be using my 20% off code for cablemod.com soon.



Conclusion
This was a Really fun build and it look/performs just the way I want it to. If I could make one change, I think I would have sprung for cablemod cables upfront. In time that will be fixed as well as the addition of RGB memory. I always appreciate feedback and any the community can give would be appreciated.





Reply With Quote
  #2  
Old 19-05-17, 11:47 PM
AlienALX's Avatar
AlienALX AlienALX is offline
OC3D Elite
 
Join Date: Mar 2015
Location: West Sussex
Posts: 8,910
I dig it
__________________
He used to do surgery
For girls in the eighties
But gravity always wins




Young man ya too girly girly, you're just a Cadbury's Curly Wurly
Reply With Quote
  #3  
Old 19-05-17, 11:53 PM
NeverBackDown NeverBackDown is offline
AMD Enthusiast
 
Join Date: Dec 2012
Location: Valhalla
Posts: 13,814
I like how the GPU is facing up
__________________
"I would have followed you, my Captain, my King."
- Boromir's last words.
Reply With Quote
  #4  
Old 20-05-17, 09:14 AM
Avet's Avatar
Avet Avet is offline
OC3D Crew
 
Join Date: Dec 2016
Posts: 577
Very nice setup. The rig is just as it should be. As Swedish people would say lagom.
Reply With Quote
  #5  
Old 21-05-17, 12:15 PM
stealth80 stealth80 is offline
Newbie
 
Join Date: Feb 2015
Posts: 49
Isn't that case for custom loops? I thought that was a reservoir in the front there

Looks sweet either way!
Reply With Quote
  #6  
Old 21-05-17, 04:50 PM
RyzenMaster's Avatar
RyzenMaster RyzenMaster is offline
Newbie
 
Join Date: May 2017
Location: Vancouver, Wa
Posts: 11
Thumbs up

Quote:
Originally Posted by stealth80 View Post
Isn't that case for custom loops? I thought that was a reservoir in the front there

Looks sweet either way!
It's part of a 360mm AIO loop, but it can all be taken apart and made into a custom loop. The helix in the front can be part of the custom loop, but it wouldn't really work as a reservoir. My eventual plan is to put a 60mm monster rad in the front and have a dedicated loop for my graphics. That is when I have a graphics card worthy of water-cooling.
Reply With Quote
Reply

Tags
aio, asus, gtx 1070, rgb, ryzen

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump










All times are GMT. The time now is 09:27 AM.
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.