Originally Posted by RobM
Ok is this a new build or the issue just started?
Actually dont bother remove gfx as there is no gfx in that chipset so will need gfx card or APU sorry for duff info there
Check the 8 pin power is seated correctly in the motherboard.
Check the motherboard standoffs are in the correct place.
Check the gfx card is fully seated home with ALL the required power connected.
Check the Ram is in the correct slot if only 1 stick it needs to be in the 1st blue slot nearest the CPU.
Check CPU is seated correctly and no bent pins.
Check the front panel connectors are correctly seated with correct orientation.
I have plugged into the rear video out using HDMI and DVI both with and without the GPU in and same happens.
Checked everything and made sure all the power cables and front IO where seated properly and no standoffs where where they shouldn't be.
Checked the GPU, was seated and had the right power
Tried all the RAM slots using both a single stick and a set
CPU is in properly no bent pins and the heat sink is mounted properly