Go Back   OC3D Forums > [OC3D] Cooling Forum > Liquid Cooling
Reply
 
Thread Tools Display Modes
 
  #1  
Old 25-01-15, 09:58 PM
patricia2626 patricia2626 is offline
Newbie
 
Join Date: Jan 2015
Posts: 4
water cooling help

I want to water cool my cpu and gpu gtx and I want good one but I want silence and cold and I want to add a water cooling fan controller to keep silent when there no load and then silent for normal or idle work?

I want to get kit is there any good ones out there i want to add a water cooling fans controller?

Are this good controller fans do they work with any system
http://www.nzxt.com/product/detail/7...n-control.html
http://www.nzxt.com/product/detail/1...n-control.html
http://www.nzxt.com/product/detail/1...ontroller.html

corsair vengeance series military green mid tower
http://www.corsair.com/es-mx/vengean...military-green

Operating System
Windows 8.1 64-bit
CPU
Intel Core i7 4790K @ 4.00GHz 119 °F
Haswell 22nm Technology
RAM
16.0GB Dual-Channel DDR3 @ 899MHz (9-10-9-27)
Motherboard
ASUSTeK COMPUTER INC. MAXIMUS VI HERO (SOCKET 1150) 83 °F
Graphics
G236HL ([email protected])
NVIDIA GeForce GTX 970 (MSI) 99 °F
Storage
931GB Western Digital WDC WD1003FZEX-00MK2A0 (SATA) 94 °F
232GB Samsung SSD 840 EVO 250GB (SSD) 92 °F
Optical Drives
HL-DT-ST DVDRAM GH24NSB0
Audio
Realtek High Definition Audio

Reply With Quote
  #2  
Old 25-01-15, 10:47 PM
steverebo's Avatar
steverebo steverebo is offline
OC3D Elite
 
Join Date: Jun 2014
Location: croydon, south west london
Posts: 1,272
you have an asus motherboard so you dont need to waste money on a fan controller. All you need to do is fo into bios and into the fan control settings and you can adjust each fan individually and link them to either motherboard, cpu or gpu temps.

I have my board controlling 6 fans on my rads all running at 60% idle 70% when it warms up a bit and 80% when my cpu goes over 70 degrees.
__________________
BeQuiet Darkbase Pro 900 | i7-7700K OC @ 5.10GHz | Custom water loop | ASUS MAximus Hero IX Z270 | Aurous Xtreme GTX 1080TI @ 2120mhz 12000mhz | 16GB Corsair Dominator Platinum @ 3200MHz CL15 | 500GB Samsung 960 Evo, 250GB Samsung EVO 850 | Corsair HX750I PSU | Windows 10 Pro 64-bit
Reply With Quote
  #3  
Old 25-01-15, 11:10 PM
Davva2004's Avatar
Davva2004 Davva2004 is offline
OC3D Elite
 
Join Date: Dec 2013
Location: Nottingham UK
Posts: 1,161
You can run 11 system and watercooling fans from the CPU header on the motherboard if you use a Phanteks PWM controller. It allows 11 three pin fans to be PWM controlled by the BIOS depending on CPU temperature.

As for a kit - nope. You'll need to buy a CPU waterblock, a GPU waterblock, a pump, reservoir, and two 240mm radiators separately. Start reading some reviews to see what kit you like.
__________________
Reply With Quote
  #4  
Old 27-01-15, 12:34 AM
Ofan's Avatar
Ofan Ofan is offline
Newbie
 
Join Date: Feb 2011
Location: Manchester
Posts: 68
I dont know what the VI hero is like but the VII hero in OS using qfan does not read the temp from the actual cores it reads from the mboard so it displays around 10-13c cooler than the actual core temps, if you can offset this using the bios/qfan tool then you shouldnt need a fan controller.

I'm running 10 fans from 2 headers on my VII hero on adjustable automated curves without having to buy any additional hardware (except splitters)

How much rad space are you thinking about having, with the right loop and some planning you can have it so you never neef to run your fans above 40-55% ish
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump










All times are GMT. The time now is 12:41 PM.
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2020, vBulletin Solutions, Inc.