Go Back   OC3D Forums > [OC3D] Cooling Forum > Liquid Cooling
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 22-06-12, 02:35 PM
MikeGT2 MikeGT2 is offline
Join Date: Apr 2012
Posts: 35

I have a fairly large loop and wanted to ensure that all metals that have been used should not cause me any concern.

What made me think about this more in depth was a small printed sheet of paper that I recently got with an EK water block. Which is...

EK FC7970 DCII Full Cover Waterblock for ASUS design Radeon HD 7970 DirectCU II Graphics Card : EN Nickel Acetal

- Base Material Nickel

- Top Material Acetal

Here is what the paper said:

I also read on the Koolance web site this....

Koolance's product warranty does not cover the use of 3rd-party coolants, coolant additives, or corrosion. Koolance LIQ-702 or LIQ-705 coolants are strongly recommended to help avoid issues with mixed metals or biological growth. Additionally, do not use aluminum with bare (unplated) copper or bare (unplated) brass in the same system. Do not use silver with nickel in the same system.
The Silver with Nickel I was also concerned about.

Here is what I have...

Koolance RP-452X2 Dual 5.25in Reservoir V2.0

- The materials used on this reservoir are a classic mix of Acetal, aluminium and acrylic.


Koolance HX-240HL

- Copper Fins, Brass Construction

Koolance CU1020V

- Copper Fins, Brass Construction

XSPC RX Series

- Copper Fins, Brass Construction


XSPC Rasa CPU Waterblock

- Base Material Copper

- Top Material Acetal


Koolance VID-AR797

- Base Material Nickel Plated Copper

- Top Material Nickel Plated Copper & Acetal


Koolance Dual VID Connector Adjustable 2-3 Slot

- made of brass

Koolance 1/4" Thread Black Barb for 1/2"

- Nickel Coated Brass

Koolance 1/4" Thread Rotary 45 Degree

- Nickel Plated Brass

Koolance 1/4" Thread 90 Degree Rotary

- Nickel Plated Brass


Silver Kill Coil (in res)

Should I remove the Silver Kill Coil? To prevent issues with Nikel?

The silver coil has a discolouration to it which as far as I know is normal as this is the protection build up (?)

Is there any potential threat to what I have in my loop corrosion wise?

Any advice great fully appreciated.
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT. The time now is 10:09 AM.
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.