OC3D Forums

OC3D Forums (https://forum.overclock3d.net/index.php)
-   Project Logs (https://forum.overclock3d.net/forumdisplay.php?f=39)
-   -   The BumblBuild-[Scratch Build] (https://forum.overclock3d.net/showthread.php?t=68145)

GiraffePencils 14-11-14 01:21 PM

The BumblBuild-[Scratch Build]
 
http://i.imgur.com/XkPAJ5T.jpg


http://i.imgur.com/5RmJV2T.jpg

Hello all :D

Here I am with my first build log!!

Now before I go into this I warn you;

I'm not the best photographer

I'm not the best with render settings

So bare with some of it, and I'm open to any and all advice.


This build will be a '2 part' build:

Firstly I will be building my case, and transporting my current PC into this case.

Secondly I will be adding all the pretty new hardware and polishing the whole build up.

Depending on money availability (damn you Christmas!!!) these parts may blend into one :D


The Case:

Here are a few renders of the case, I'm really not an artist so the settings are all fairly default :(
http://i.imgur.com/iT6vVPC.jpg
http://i.imgur.com/b9OUR17.jpg
http://i.imgur.com/I2gKsGB.jpg

The case is an aluminium frame which holds the components and an acrylic shell that keeps it all looking pretty :)


The Hardware:
Current hardware that'll be moved in stage one is:
i7 920
XFX 290x
6Gb corsair Ram

The Stage 2 Hardware will be:
i7-4790K
Gigabyte Z97X-UD3H-BK
XFX 290x
Avexir Golden Blitz 16GB
SuperFlower Leadex GOLD 850W Fully Modular- Black


The Cooling:
The watercooling I will be putting into this build is:

Fittings: Monsoon hardline and soft tubing (spattering of other fittings for drain port etc)
Pump: EK PWM D5, With EK top.
CPU: EK Supremacy Clear
GPU: EK original CQC 290x block (Which I will polish clear)
Rads: EK 240 PE
Res: Bitspower 170mm tube
Controller: Was going to be an EK Acendancy but email from EK today says it's shelved so Aquacomputer aquearo
Temp sensor: XSPC G1/4" Plug
Fans: currently have 4 Piranha's in their boxes. But I've bought EK Vardars instead

Now This project started for me a while ago and I've been motivating myself through it.
I thought I should share my progress as I'm starting to lose track of what I've done for writing up later :p

Progress So Far:
Metal arrived:
http://i.imgur.com/M77UC7s.jpg
http://i.imgur.com/XVppvvY.jpg
http://i.imgur.com/mCwmpSO.jpg

Tools too:
http://i.imgur.com/Z2ZF9Ou.jpg
http://i.imgur.com/BymWhip.jpg
http://i.imgur.com/UlaNeUQ.jpg

Case will be constructed of Aluminium angle screwed into 25mm square bar.

Cut all the angle down to size(Thanks Dremel):
http://i.imgur.com/ClY855o.jpg

Drill and Tap all the Square Bar:
http://i.imgur.com/fiuNniB.jpg
http://i.imgur.com/WIRtUch.jpg


DISASTER!!!
3 holes to go and I get a little too excited and:
http://i.imgur.com/pQCogXE.jpg

Snap my tap......
So annoying, that tap end is in there tight, nothing I can do is getting that out with the tools I have. It gouged a chunk out of my pliers :o

Lucky the bar could be turned around and I drilled the other side and it went together fine. A bit of filing flattened out the tap bit.


Countersink the Angle so the acrylic can sit flush on top of it, I didn't have a drill slow enough, so I had to do these by hand turning the chuck :(
http://i.imgur.com/CTTZNG5.jpg

It FITS!!
http://i.imgur.com/ki3ucJI.jpg

Sides together:
http://i.imgur.com/N9suUzy.jpg

Finish the rest up:
http://i.imgur.com/w5BbcUz.jpg
http://i.imgur.com/VPTlqZN.jpg

Work going well :D

I am currently in the position of having incorrectly drilled 12 holes (measure twice, always measure twice) so I have filled the holes and tonight am going to get them in the right place.
These holes will be for mounting the internal components and motherboard tray etc.

To Tide everyone over I will finish with my first attempt at taking component pictures (photographers should look away now! )

http://i.imgur.com/pMKRlVl.jpg
http://i.imgur.com/tZJot6X.jpg
http://i.imgur.com/xStMTYc.jpg
http://i.imgur.com/ilDgFiO.jpg
http://i.imgur.com/4QXGTdd.jpg
http://i.imgur.com/45sa9e6.jpg
http://i.imgur.com/fjBm5Un.jpg
http://i.imgur.com/twRZ00W.jpg
http://i.imgur.com/iTEmCJb.jpg
http://i.imgur.com/JPpq5RN.jpg
http://i.imgur.com/mum3yc1.jpg
http://i.imgur.com/AWCKqzk.jpg
http://i.imgur.com/PFirif6.jpg
http://i.imgur.com/6oYYtVR.jpg
http://i.imgur.com/4KcJ2mZ.jpg
http://i.imgur.com/4nkBcAQ.jpg
http://i.imgur.com/WWoXgzE.jpg
http://i.imgur.com/tgo8w40.jpg
http://i.imgur.com/j5HVSBw.jpg
http://i.imgur.com/l3UEXb9.jpg
http://i.imgur.com/pPYXVL2.jpg
http://i.imgur.com/F1xO5jK.jpg
http://i.imgur.com/ob4avLJ.jpg
http://i.imgur.com/LwYKj68.jpg

Innocent159 14-11-14 01:32 PM

First picture got me subbb. The render looks good for an amateur. Can't wait to see it get together.
Good luck

Wraith 14-11-14 01:32 PM

It's a very interesting start to a scratch build, kudos for doing a scratch build detail is everything.

Highlander89 14-11-14 01:34 PM

Wow, what a cool looking project you got going on dude! Always been a fan of black and yellow themes. Although I have to say I'm not liking all the pipes in the sketch, looks too crowded imo. But very brave doing it from scratch.

The pictures look great. Best of luck to you mate. :) subbed!

GiraffePencils 14-11-14 02:05 PM

http://i.imgur.com/XkPAJ5T.jpg

Quote:

Originally Posted by Innocent159 (Post 805923)
First picture got me subbb. The render looks good for an amateur. Can't wait to see it get together.
Good luck

Thanks, you can owe the render from 2-3 months solid in blender and sketchup learning as I go.
This must be the 4th PC design I did. and the one I settled on :)

Quote:

Originally Posted by Wraithguard (Post 805924)
It's a very interesting start to a scratch build, kudos for doing a scratch build detail is everything.

Thanks, I've already had a couple of points I've had to mark out for further filing due to some too snug fitting pieces. Hopefully when I paint it at the end it'll cover my failings :D
Quote:

Originally Posted by Highlander89 (Post 805926)
Wow, what a cool looking project you got going on dude! Always been a fan of black and yellow themes. Although I have to say I'm not liking all the pipes in the sketch, looks too crowded imo. But very brave doing it from scratch.

The pictures look great. Best of luck to you mate. :) subbed!

I'm glad it's not just me, the colour scheme sort of came together as I was playing with colours.
It does seem crowded, but it was far worse as I started the design with 16mm tubing in mind :p
I can pull the window out a wee bit, I'll have a better Idea once the mobo's in and a couple of prototype panels.


If people want more renders/angles for a better Idea I can, I'm limited to only a couple days a week in the workshop, so metal work has to wait. I'm going to document my Polishing of the frosted block, so we have that coming :D

Tripp 14-11-14 02:06 PM

Well I am subbed, looking forward to seeing how the case comes together

GiraffePencils 17-11-14 11:49 AM

http://i.imgur.com/XkPAJ5T.jpg

Quote:

Originally Posted by Tripp (Post 805939)
Well I am subbed, looking forward to seeing how the case comes together

Thanks, you and me both :p

It's Time for a Mini-Update, It's a:
http://i.imgur.com/35ey74D.jpg

At the weekend I wore out my last cutting disk for the dremel :(
I have other not Ideal ones, but they're slow going :(

I was trimming the metal that holds the Rads in place, allowing more airflow. I was also measuring up the holes to mount the Rads.

I am going to have another bash at getting this laser cutting done on my MoBo Tray. I have saved this DXF in just about every blooming way I can and if it doesn't work I'm at a loss really.
I'll have to bring my laptop down and plug myself INTO the cutter and make it while plugged in, and that's gonna eat into the cost of the rental :(

Also I will try and get some feet made for the case. cutting them out of a spare piece of Bar. I might try for some step by step shots, but it'll be on the phone :( not taking the dslr to the workshop :p

FINALLY (In this update with no fancy new pics)
I am debating with myself weather I should move my current PC or bite the bullet and just buy the new hardware sooner. What do people think?

Thanks :)

GiraffePencils 18-11-14 10:39 PM

http://i.imgur.com/XkPAJ5T.jpg

So I'm here for an update :D
Sorry for the photos, potato phone :(

I've been to the workshop tonight, I got my files right on the laser cutter (yay!)
LASER(trust me, it's in there)
http://i.imgur.com/LTPuhxl.jpg

so now I have my first pass mobo tray:
http://i.imgur.com/7S3FXzz.jpg

It fits in:
http://i.imgur.com/LMhMkNm.jpg
http://i.imgur.com/PG4RiGs.jpg

I also drilled my rad mounting holes:
http://i.imgur.com/k5nvpTv.jpg

Now it's hard to see there, but I'm well happy with those holes, they line up freaking perfect :D

Last but not least I cut up some bar that will be filed down to make feet:
http://i.imgur.com/Xj2rAqb.jpg
http://i.imgur.com/nfRWAns.jpg

I will file these into hexagons to follow the 'bee' theme and either polish them up or paint them :)

GiraffePencils 21-11-14 09:10 AM

http://i.imgur.com/XkPAJ5T.jpg

Update Time.

I have to say my enthusiasm is a bit dead today as the bank froze my Credit card and a bunch of payments didn't go through....
Silly bank, like I don't have a history of buying expensive electrical components online :p

Anyhoo, on-wards!

I drilled the rest of my Rad brackets, still need trimmed for increased airflow.
Need to file some bits down for neatness and evenness.

Speaking of filing:
http://i.imgur.com/zjWEgFQ.jpg

FEET!!

http://i.imgur.com/4n4VtYC.jpg

3 hours of filing and they are all the same size and flat.

Need to get the corner's off, drill and polish and they'll be done :D

With regards to the Motherboard being purchased early....this is going to be tightly linked to funds:
I'll buy my son and partner their Christmas presents and then my family will have to wait and see if I love PC more than them :p

Until next time :D

GiraffePencils 24-11-14 08:06 PM

http://i.imgur.com/35ey74D.jpg

Right all,
I'm here to give you all a wee update and to throw what's going on with me, and what I'm thinking about right now.

So first things first, I'm a games dev by passion. I'm currently doing a game jam to 'make a game in a month'.
This jam ends on Saturday so I might have to park updates till I'm done, but we'll see :)

This weekend I got far less than I wished to get done, Christmas shopping etc. so the feet aren't done :(

Also some of the screw holes need a few 'adjustments' with a file :/


On the hardware front (the fun stuff) it's looking like I'll grab the CPU, Mobo and PSU this month (Don't tell my other half and I'll hide the credit card bill ;) )
I'll try and take some decent pictures this time, any advice? I'm thinking higher f (f20?) more light.

Also I may add a 'to do list' to the OP, score off as we go, for your and my benefit :p

ANYHOO!

Here's some pics from the weekend, not the most Ideal location in the spare room so pics pretty meh:
http://i.imgur.com/z5pFZZD.jpg
http://i.imgur.com/HWDfMLV.jpg

First of the Feet:
http://i.imgur.com/1cC3Lq9.jpg


All times are GMT. The time now is 06:35 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.