Recent content by Scarey

  1. S

    HD7950 and Skyrim issues

    I've got a Sapphire 7950 oc and it's great apart from Skyrim. The net is littered with possible fixes, but none seem to work. The game just freezes after a few seconds of play. I'm running catalyst 12.4 drivers, but from the web it seems the last few versions have all had skyrim issues of one...
  2. S

    Sapphire 7950 oc voltage

    I can't seem to be able to increase the voltage on my card. CCC or Trixx moves it in the scale, but the actual voltage stays the same in GPU-Z and HW Monitor. Do I need to enable bios 2 or??
  3. S

    Water cooling a gpu

    Am I missing something...? Apart from the enthusiast/interest side, what's the point of water cooling a gpu? As I see it, you need to buy a reference card to make finding a water block easier, yet reference cards have no/little voltage control that a card such as an MSI lightning has & thus...
  4. S

    GTX 680 overclocks

    Hey, I've been wondering how far you guys out there with shiny new gtx 680's have managed to overclock them?
  5. S

    HD 7870 & 7850

    I've seen good things about the 7870 & 7850 cards. Prices on aria look to be £269.99 & £199.99 and other reviews show near gtx 580 performance on the 7870. Are any of these cards up for review soon?
  6. S

    Possible NZXT Hale90 850W problem

    My NZXT Hale90 850W power supply seems to have a fast switching/clicking sound coming from it when under load. Not sure this is normal, but it doesn't sound like it. I thought it was a fan with a dodgy bearing, but on inspection, all the fans are ok including the psu fan. The sound is coming...
  7. S

    2500K 5Ghz

    Well I got a 5Ghz stable overclock with Prime for 45mins. Not 24hrs I know, but I'm goign to back it off and that was only 1.4v You may need to enlarge the image...
  8. S

    CPUz vs Bios voltages

    I've searched but can't see this being raised before. Overclocking my 2500k in Asus 'Turbo V EVO' and the CPU voltage is set to 1.18v, yet CPUz shows the vcore to be 1.296v.... Which is right?
  9. S

    New build crystal disk results

    I've just finished the new rig and have run Crystal disk. I have a Corsair C300 64GB SSD on the Marvel Sata 6 set as OS boot drive. I also have 2x WD Cavair Blacks 1TB set on the Sata 6 Intel mobo and rapid storage as raid 1. However, all 3 drives are using Bit Fenix Alchemy Sata 2 cables, as...
  10. S

    Hardware for sale forum

    Just a thought whilst reading another post on here. Perhaps a selling forum would be useful. Guys and girlies on this site change hardware often and are left with the 'old' bits. How about a simple For Sale forum..?
  11. S

    Last check on components b4 build

    Well I think I've nailed down the final line up for my GF's new rig. Check it out and comment where I've been dumb Case= Silverstone RV02E white PSU= NZXT Hale 90 850W Mobo= ASUS Sabretooth P67A CPU= 2500k CPU cooler= Fugly Noctua NH-D14 (may change fans if hideous) RAM= undecided on...
  12. S

    Be Quiet! Dark Rock Advanced with 2500k @ 4.8Ghz

    I'm about to build a rig with an Asus Sabretooth P67A and 2500k. Now if the chip will clock to 4.8Ghz, as it has a high chance of doing on that board, will the Be Quiet! Dark Rock Advanced handle the heat. I know it's all volts and I haven't won the silicon lottery yet, but does anyone out there...
  13. S

    P67 ram voltages

    Which is better, 1.35v or 1.5 v and why guys?
  14. S

    GTX 580

    Almost time to order my components. An air cooled GTX580 it is, now just which model......? I was looking at the MSI Twin Frozr, but is there a better card and why. Please include overclocked models and don't ask for a budget, that just comes down to is it worth the cash!
  15. S

    Sabretooth P67A PCIe slots

    Just noticed this board has 2 x PCIe 2.0 x16 (x16 or dual x8) Will SLI 580GTX cards suffer a bottleneck at dual x8 slots?
Back
Top