Recent content by Barry

My first aircooled PC Specs: e2200 @ 3.7Ghz w. Prolimatech Megahalems DFI P35 T2RS 4Gb Corsair 8500 Dominator ATi 4850 512Mb w. Thermalright T-RAD2 2x 1TB Spinpoint F3's LG DVD-RW Corsair HX520 6x Low speed 120mm Yate Loons @ 7v. Lian Li AO5-B :D

I haven't been on here for donkeys years, due to basically, a combined lack of money and intrest, but 'the times they are a changing'.. So I've got a new(ish) project going and have decided to be more active again :wavey: I'll put up a post somewhere about my PC aswell :P

Watery rev. 2 It’s been a good old while since watery has had an update, let alone any progress, and to be honest, I got utterly stuck on how to mount the reservoir to the actual case body, while still being able to remove the case panels to get to the hardware, so it was time to start over...

So, I was after a Mountain Mods H2Go, but I couldn't justify spending £200 odd on a case, when about half of it was going to be shipping... So, I've ordered an A05-B with the plan of sticking my PC in it, complete with water-cooling... I'll have a BIX2 on the top above the PCI ports as I only...

Firstly, I know its actually aluminium foil, but tin sounds cooler.. And this probably is in the worng forum. My PC has been giving our houses digital some headaches, such as no reception what so ever when my PC is on. So instead of buying a new case sans-windows, I raided the larder. The...

Could I get some opinions on my final reservior design please. Its got 3x G1/4". Two on the rear to be connected upto the loop, and the other on the front for a custom made stopper for filling and emptying the loop. Its made from 4 layers of 10mm (could be 8mm depending on whats in the...

I'm redoing my PC and my loop and decided to make a log of it. Hardware and watercooling aren't really anything special and all of the WC bar the tubing and the CPU block are ~ 2.5 years old now. As this is my daily driver, so silence is key. The total spec at the end of this all will be...

Basically as per title. I don't really want to have to spend the extra cash on a q6600 unless it would be a much better processor.

Just wandered what you though of the following.. I need to start choosing the hardware for Watery. I want an external DVD drive because I barely ever use one, and it will make the netire project much easier to work. Also, the PSU HAS TO BE modular.. Opinions?

I've got a full copy, and once I pop in the Doovde, I get the normal install shield style thing, I enter my product code ect, and then nothing else happens. so I try and email EA... No help, and I can't set-up the damn profile to e-mail them from school. I now go through a small series of...

Hello all... I'm considering an upgrade on my system.. I currently have..: Opty 146 X1800 Ultra-d 160Gb 520W Corsiar Watercooling If I were to sell all the spare watercooling bits, and use my savings, I'd have £450 to spend on the hardware. So keeping the HDD and the PSU, I'd be...

Been thunking about my new Res design for watery, so without delay...: (the only thing thats accutate exactly is the outer size of the res and the thickness) Allthough you can't tell by the res, the holes at the top with the plugs, will actually be 11.8mm holes with a G1/4" tap at the top...

Basically as per title. Or do I have to get a NB/SB 3?

A few little thingies... According to my measurements, I have just enough space in the bottom of watery for a DB-1 or a DDC. I'd rather go for a DB-1 due to its top out-put (preffered!) and the fact its cheaper, but would it be able to get enough water through..: MC-TDX MC-Chippy IONE or...

My room at school, now with larger screen estate!