Go Back   Overclock3D Forums > [OC3D] Graphics & Displays > Overclocking
Register FAQ Community Calendar Today's Posts Search
Reply
 
Thread Tools Display Modes
 
  #1  
Old 25-02-13, 06:00 PM
Trylen Trylen is offline
Newbie
 
Join Date: Dec 2012
Location: USA
Posts: 21
FX-6300 on Asus M5A97 R.20 to 4.5GHz

Found a stable OC for my rig that impressed me. A sweet 22.23% boost.
200MHz x22.5 @1.43v
Ram 1600 9-9-9-24 @ 1.5v (no OC here)
CPU/NB: 2200 @ auto voltage
HT: 2400 @ auto voltage
CPU LLC enabled
CPU/MB LLC: enabled
NB voltage: 1.15
Turbo/C6/HPC/APM: disabled

Tried this after getting the Hyper 212 Evo, and bloody hell, the temps raised by maybe 5C on idle and never exceeded 60C on a load. I never have an AMD do a full 1GHz over rated before, but my last AMD before this was the s939 Athlonx2 3800+ that was hard pressed to do 2.4GHz.
Only issue I had was a my fault thing. Due to cats and a smoker wife I added a cheap filter mod, bounce sheets. Works well in the front but the bottom fans (more so the PSU) get clogged so the PSU was shutting off because of overheating. I had to flip the psu over and all is shiny. Wish the Coolermaster HAF932 had mounting for the PSU to be Fan up and came with filters..... but resourcefulness works too.

__________________
__________________
Pyriel: Proc: Intel i5 4670K @ 4.2GHz @1.22v w/ Corsair H100i ( 2x Corsair SP120 Performance Ed.) MB: MSI Z87-G45 Video: EVGA GTX 760 SC 4GB Ram: Corsair Vengeance 8GB DDR3-1600 9-9-9-24 PSU: Corsair GS600 Case: Phanteks Enthoo Luxe SSD: Plextor PX-256M5M HDD: WD 640GB(app drive) + 1TB WD Green(storage drive) Optical: Liteon Bluray/DVDRW Input: Corsair Raptor K50 and Vengeance M95 (White)
Reply With Quote
  #2  
Old 25-02-13, 08:15 PM
Master&Puppet's Avatar
Master&Puppet Master&Puppet is offline
OC3D Elite
 
Join Date: Sep 2011
Location: London
Posts: 1,954
Looks decent to me Sounds like you've had a lot of fun too which is also important!
__________________
Ivy Bridge Overclocking
Overclocking pt2-LLC & Vdroop

OC3D Overclockers Club Member #006 (Alec Trevelyan was always harder than Bond anyway)
Reply With Quote
  #3  
Old 26-02-13, 07:13 AM
Trylen Trylen is offline
Newbie
 
Join Date: Dec 2012
Location: USA
Posts: 21
Even toying with the GTX 550TI clocks.
I used to run my Q9650 at 4.0 (450*9@1.4V) for the the time is ran as my gaming rig. Having to take a couple months at stock was bugging the hell out of me.
__________________
__________________
Pyriel: Proc: Intel i5 4670K @ 4.2GHz @1.22v w/ Corsair H100i ( 2x Corsair SP120 Performance Ed.) MB: MSI Z87-G45 Video: EVGA GTX 760 SC 4GB Ram: Corsair Vengeance 8GB DDR3-1600 9-9-9-24 PSU: Corsair GS600 Case: Phanteks Enthoo Luxe SSD: Plextor PX-256M5M HDD: WD 640GB(app drive) + 1TB WD Green(storage drive) Optical: Liteon Bluray/DVDRW Input: Corsair Raptor K50 and Vengeance M95 (White)
Reply With Quote
  #4  
Old 27-02-13, 02:01 PM
Master&Puppet's Avatar
Master&Puppet Master&Puppet is offline
OC3D Elite
 
Join Date: Sep 2011
Location: London
Posts: 1,954
Yea - I firmly believe that it damages the soul to leave anything at stock :P
__________________
Ivy Bridge Overclocking
Overclocking pt2-LLC & Vdroop

OC3D Overclockers Club Member #006 (Alec Trevelyan was always harder than Bond anyway)
Reply With Quote
  #5  
Old 27-02-13, 02:05 PM
Kopesetic's Avatar
Kopesetic Kopesetic is offline
Advanced Member
 
Join Date: Feb 2013
Location: Southeastern US
Posts: 267
Let's face it, even the CPUs that can't be overclocked want to be overclocked!
Reply With Quote
  #6  
Old 27-02-13, 04:19 PM
Trylen Trylen is offline
Newbie
 
Join Date: Dec 2012
Location: USA
Posts: 21
I got married a few months back, what soul? (Married to a Redhead, they steal souls remember) *smirk*

But so very true, I found a guide to overclocking an iPod touch the other day, proof everything can and should be OC'ed
__________________
__________________
Pyriel: Proc: Intel i5 4670K @ 4.2GHz @1.22v w/ Corsair H100i ( 2x Corsair SP120 Performance Ed.) MB: MSI Z87-G45 Video: EVGA GTX 760 SC 4GB Ram: Corsair Vengeance 8GB DDR3-1600 9-9-9-24 PSU: Corsair GS600 Case: Phanteks Enthoo Luxe SSD: Plextor PX-256M5M HDD: WD 640GB(app drive) + 1TB WD Green(storage drive) Optical: Liteon Bluray/DVDRW Input: Corsair Raptor K50 and Vengeance M95 (White)
Reply With Quote
  #7  
Old 08-03-13, 02:45 AM
Mgutierrez33's Avatar
Mgutierrez33 Mgutierrez33 is offline
OC3D Crew
 
Join Date: Nov 2012
Location: Tampa, Florida
Posts: 524
mmmmm, nice clock you got on that FX. Decently low volts too (as AMD processors go).
__________________
Corsair Graphite 760T : Sabertooth 990FX R2.0 : FX 8350 @ 4.7 GHz : 8 GB Vengeance LP Low Voltage memory @ 2133 MHz : PowerColor AXR9 280X (1100 MHZ core, 1600 MHz mem) : Kingston HyperX 3K 240 GB SSD : Cooler Master Glacer 240L : Fractal Design Newton 800W PSU : NZXT Sentry 3 Fan Speed Controller
Reply With Quote
  #8  
Old 27-07-13, 04:48 PM
matane matane is offline
Newbie
 
Join Date: Jul 2013
Posts: 1
Just over clocked my FX-6300, got it running stable at 4.5ghz with stock voltage (max is about 1.332V). Have run prime95 on small fft's for a couple hours with no problems at all. Must have gotten a good processor.
Reply With Quote
  #9  
Old 31-03-14, 07:21 PM
Vengian Vengian is offline
Newbie
 
Join Date: Feb 2014
Location: Czech Republic
Posts: 1
Quote:
Originally Posted by matane View Post
Just over clocked my FX-6300, got it running stable at 4.5ghz with stock voltage (max is about 1.332V). Have run prime95 on small fft's for a couple hours with no problems at all. Must have gotten a good processor.
give us some screenshots. I can hardly bealive, when im looking at my volts on 6.1K at 4.1GHz
Reply With Quote
  #10  
Old 31-03-14, 08:56 PM
Wraithguard's Avatar
Wraithguard Wraithguard is offline
OC3D Elite
 
Join Date: Jun 2013
Location: Chesterfield, Derbyshire
Posts: 3,212
Quote:
Originally Posted by matane View Post
Just over clocked my FX-6300, got it running stable at 4.5ghz with stock voltage (max is about 1.332V). Have run prime95 on small fft's for a couple hours with no problems at all. Must have gotten a good processor.
Lets see some CPUZ validation then. 4.5Ghz at Stock voltage is a excellent OC especially for AMD.
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump






All times are GMT. The time now is 12:46 PM.
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.