While im working on slowly building the funds for my new build ive been working on the layout/colors i want, the x58a-oc has been a main part of my planning since i started and unless BD/ivy has some major performance increase for a low price i will be going with the x58a-oc for the build, yes i know its pretty much an EOL socket but it still performs very well and id rather get a rig im happy with and is going to last me 2-3 mabey 4 years before i upgrade socket again (new gpu's will be the only real upgrade id do before a full new build)
The main problem ive had is working out the cooling capacity, layout of the rads ect id need for efficient cooling for 2x 570 and a 920/930/950 or mabey a 970 if i can nab one of the ones that go for 220-250 on ebay.
What ive got so far in the plans is a non slim tripple in the roof, the best double in the front top of the drive bays, a tube res in the dead space on the mobo tray, a pump sat on a mount over the intake fan/fan slot on the floor.
Layout wise ive got it planned pump - gpus - cpu - rad - rad - res - pump.
(The mobo and ram are just stand in and were the first 2 i found)
I also need to change the barb on the top of the gpu's to a 45 deg and the inlet on the cpu to 45deg, and either a 45/90 on the outlet of the cpu but ill get to that when i do the tubing.
Is there anything i NEED to change about this set up? or anything that would be beneficial? I dont mind changing it it if its worth while its just id rather change it before i work on adding the tubing and start rendering it out as they are by far the most anoying/time consuming parts.
I know i could just leave it as is but i prefer having decent plans before i start working on anything like this.
Cheers for any help in advance.
[s]mhmm image links are broke ill fix them now[/s] :fixed: