Go Back   Overclock3D Forums > [OC3D] Processors & Platforms > Mainboard & CPU
Reply
 
Thread Tools Display Modes
 
  #1  
Old 13-01-06, 07:02 AM
yoni45 yoni45 is offline
Newbie
 
Join Date: Aug 2005
Posts: 55
Thermal pad?

Are these generally useful at all? Or is it just best to ignore them altogether and use thermal paste?

Also, as for the A64s, I know they come with a "cover" (if you will) over the actual die, when applying thermal paste, does one just spread it across the entire top of the cover?

Reply With Quote
  #2  
Old 13-01-06, 07:22 AM
FarFarAway FarFarAway is offline
Newbie
 
Join Date: Mar 2005
Posts: 0
I would scrape off the Thermal pad on the stock heatsink and replace it from there with some AS5*

Note on how to install are In here



*Please note this will void the warranty as for some unknown reason AS5 is not one that AMD warranty
Reply With Quote
  #3  
Old 13-01-06, 08:34 AM
RollerCam540 RollerCam540 is offline
Member
 
Join Date: Mar 2005
Posts: 158
FYI: I believe you void your warranty if you use any HSF other than stock (that's what I was told when I called AMD for a replacement (lucky me I udrf the stock HSF, thermal pad, and all). I know for a fact that if you remove the thermal pad that's a definete breach of contract. The icing on the cake is AS5 will void your warranty because AS5 is conductive.
__________________
AMD Athlon64 90nm 3200+ (2000mhz) @ 2750mhz

MSI K8N Neo2 Platinum @ 275mhz FSB (1:1 ratio 275x10)

1GB (2x512mb) of G.SKILL DDR550 PC4400 ram (2.65v)

Enernex 550w PSU

+3.3v/36A +5v/36A +12v/36A -5v/1A -12v/1A +5VSB/2.2A

2xMaxtor 80GB 6Y080M0 SATA150 Hard Drive

MSI 6600GT 8xAGP 128MB DDR3 Video Card

Windows XP SP2

Dangerden Watercooled
Reply With Quote
  #4  
Old 16-01-06, 09:57 AM
PV5150 PV5150 is offline
OC3D Elite
 
Join Date: Mar 2005
Posts: 9,934
Quote:
Originally Posted by name='RollerCam540'
FYI: I believe you void your warranty if you use any HSF other than stock (that's what I was told when I called AMD for a replacement (lucky me I udrf the stock HSF, thermal pad, and all). I know for a fact that if you remove the thermal pad that's a definete breach of contract. The icing on the cake is AS5 will void your warranty because AS5 is conductive.
Actually AS5 is an thermally conductive agent, not electrically conductive...big difference Although AS clearly state that it has the 'potential' to be slightly capacitive [a measure of the amount of electric charge stored (or separated) for a given electric potential]. But you'd have to be an extremely clumsy dipshit to spread it over electrical traces, but hence the reason AMD shall not warrant it's use on their processors.

Arctic Silver 5 was formulated to conduct heat, not electricity.

(While much safer than electrically conductive silver and copper greases, Arctic Silver 5 should be kept away from electrical traces, pins, and leads. While it is not electrically conductive, the compound is very slightly capacitive and could potentially cause problems if it bridges two close-proximity electrical paths.)

Source: http://www.arcticsilver.com/as5.htm
__________________
Quote:
Originally Posted by name='Jim'
"Jonathan 'Fatal1ty' Wendel may be 12-time world gaming champ, but how does he cope inside a 50c hot box sucking on a heavy load?":rocker::rocker:
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump






All times are GMT. The time now is 07:31 AM.
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2013, vBulletin Solutions, Inc.