Go Back   Overclock3D Forums > [OC3D] Hardware & Software > Storage Mediums
Reply
 
Thread Tools Display Modes
 
  #1  
Old 28-11-10, 09:48 AM
dipzy's Avatar
dipzy dipzy is offline
OC3D Elite
 
Join Date: Oct 2010
Location: London, United Kingdom
Posts: 2,453
Hey guys,

Im looking for a new SSD drive, around 120GB Capacity. I have looked at both the OCZ RevoDrive or OCZ Vertex 2E but i cannot decide which to go for, revodrive has the insane speeds and the vertex 2E has TRIM support.

What do you think i should get and why?

Dipzy

__________________
Main Rig: The CaseLabs STH10 Project

Temp rig: Q6600|NH-D14|Striker2Extreme|4GB XMS3|AX850|120GB SSD|1TB|4TB NAS|Asus VH226H|Roccat ISKU|Kinzu v2|Siberia v2|Gigaworks G500|
Redline@ oc3d Team 98860
Reply With Quote
  #2  
Old 28-11-10, 09:51 AM
thestepster's Avatar
thestepster thestepster is offline
OC3D Elite
 
Join Date: Nov 2009
Location: Scotland
Posts: 2,964
u categorically want trim mate or ull be fresh installing windows every month but look at the corsair forces and Kingston v+ drives
__________________


Intel Core i7 @ 4ghz and rising!

Noctua NH-D14 - Samsung F3 1TB - Asus P6X58D Premium - 12GB Corsair XMS3 1600

Zotac GTX580 at 895/1790/4200 @ 1030v (1000mv stock @ 772 core) - Corsair TX850 - Corsair 700D


Reply With Quote
  #3  
Old 28-11-10, 09:57 AM
AlienALX's Avatar
AlienALX AlienALX is offline
OC3D Elite
 
Join Date: Jun 2010
Location: On Mars as an anthropologist
Posts: 5,411
Send a message via MSN to AlienALX
As much as any one tells you to get an SSD without TRIM don't.

You can butter it up and you can try and say that it doesn't affect the drive too much but the cold fact is it does.

Back in January when TRIM was being introduced I made the silly mistake of not doing my research first and got a Corsair X32 pre TRIM firmware. It was the worst mistake I ever made. Due to me constantly tweaking my hardware (drivers OS etc) it would slow within a matter of weeks. Not months as people say. Secondly when you benchmark it you ruin it. When benchmarking you read and write tons of data to the drive. Within the space of three benchmarks performance will already start to degrade.

The biggest problem is how awkward that can be. On a SATA based SSD performance can only be restored in a couple of ways. The first thing you then need is good imaging software. You then need to continually remember to do a backup to an image which is a faff. Then you need to burn a Diskpart utility disc (linux distro) and boot into that and unlock your drive (hot plug the power) before booting from an imaging disc and restoring it. It's a major hassle.

I don't know about these revodrives or if they come with a utility but I do know if they lack TRIM or something that does the same thing I would give them a very wide berth. The Crucial C300 drives (I think that's what they're called) run the revos very close, cost less and have TRIM. Mind you so do any of the Sandforce controller SSDs.

As I say dude, the secret to buying ANY SSD is to do your homework first. Not look at specs and say "no TRIM". Make sure you're covered because nothing sucks more than messing around with SSD all the time.

Apparently the new Kingston SSD have a way to TRIM (well, the same thing) in RAID. At which point they will probably work out cheaper, go faster, and have the ability to maintain their performance.

Tom knows more about this
__________________
Alienware Area 51 ALX chassis. Intel Xeon E3-1220 V1 @ 3.4ghz.12gb Mushkin Radioactive/Blackline. Palit GTX 670 Jetstream X2. MSI Z77A-G45. Corsair H60. 1200W Newton Labs 80+ Silver. 2X 120gb Corsair Force SSDs. 6x 500gb Seagate Pipeline.DVDRW.

Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump






All times are GMT. The time now is 04:22 AM.
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2013, vBulletin Solutions, Inc.