Want to OverClock To 3.6Ghz

JOSE T · #1 21-02-09, 03:04 PM

I when out and got me a >>>

Q6600 GO - 2.4GHZ VID 1.28v

SILENCER 610W Power Supply

EVGA 9800 GTX+ 512MB

Sunbeam Tuniq Tower 120

4 * 2gb DDR2 1066Mhz PC2 - 8500 C5 CORSAIR DOMINATOR

ALL THIS IS GOING IN TO THIS CASE

zak4994 · #2 21-02-09, 03:14 PM

Do you know the basics?

Make sure you have enough voltage running through.

That should keep you busy for a bit.

Welcome btw!

Luigi · #3 21-02-09, 03:32 PM

Try around 1.45v on the CPU. you will also need to put other volts such as PLL up.

JOSE T · #4 21-02-09, 04:23 PM

Quote:

Originally Posted by name='Luigi'

Try around 1.45v on the CPU. you will also need to put other volts such as PLL up.

ok let's try that

tinytomlogan · #5 21-02-09, 04:44 PM

And set the ram and the boot strap manualy.

Also watch the temps, you must stress test for afew hours to see what your temps go up too, anything above 60c and you need better cooling or less volts.

JOSE T · #6 21-02-09, 09:44 PM

Quote:

Originally Posted by name='tinytomlogan'

And set the ram and the boot strap manualy.

Also watch the temps, you must stress test for afew hours to see what your temps go up too, anything above 60c and you need better cooling or less volts.

After playing around whit the Bios:sleep: trying to overclock The Q6600 Go CPU

to 3.6GHZ

i keep on getting 64 65 64 65 that's not good at all

, so then i try a new setting but windows don't boot at all,

so here are these settings im talking about let me know what to do P.S

JOSE T · #7 22-02-09, 12:04 AM

Any body?

Hatman · #8 22-02-09, 09:44 AM

3.6may just be out of reach. Up the vcore to 1.45 and if that cant get it to boot stable you may have to aim for a lower clock speed.

tinytomlogan · #9 22-02-09, 11:31 AM

MCH (northbridge) needs to go up aswell.

Those temps are too high mate. You might not be able to get 3.6 with that cooler.

Id go for 3.4 with lower volts tbh.

JOSE T · #10 22-02-09, 12:37 PM

Quote:

Originally Posted by name='tinytomlogan'

MCH (northbridge) needs to go up aswell.

Those temps are too high mate. You might not be able to get 3.6 with that cooler.

Id go for 3.4 with lower volts tbh.

is not the cooler is me. i just have to set it whit low temps

by the way

i have EVEREST Ultimate Edition is this good