Go Back   Overclock3D Forums > [OC3D] Processors & Platforms > Overclocking
Reply
 
Thread Tools Display Modes
 
  #31  
Old 15-12-08, 09:37 PM
SwaleSmith SwaleSmith is offline
OC3D Crew
 
Join Date: Sep 2008
Posts: 967
Quote:
Originally Posted by name='monkey7'
No, I cannot be 100% sure that RealTemp is right. I downloaded the newest version (2.88) and CoreTemp, they both indicate a tad higher than RealTemp 2.70.

And yes, I have seen a lot of clocks running at 80C, also around 4gHz. So in that field, you're not doing bad at all

P95 blend for 16 hours hit a max. of 66C here. Currently folding at 54/57/55/54.
can't work it out how come your temps are so low surely the noctua can't be that much better than a my asus triton 81 and you running more volts!!!!

__________________
Lian Li V1000 Plus - Core i7 920-Rampage II X58-Watercooled With 2x Feser TFC Xchanger 120mm Rad, EK Supreme Acrylic CPU Block, Laing DDC-1T Ultra Alphacool Top XSPC Res-XFX GTX295 (Overclocked 680/1380/1100mhz) - 3x2GB (6GB Total) Corsair Dominator Triple Channel DDR3 1600mhz - Tagan Piperock 1100w PSU - OCZ Summit 120GB SSD (O.S) - 2x WD Velociraptors Raid-0 (Storage) -Windows 7 RC1 64Bit
Reply With Quote
  #32  
Old 18-12-08, 09:18 PM
SwaleSmith SwaleSmith is offline
OC3D Crew
 
Join Date: Sep 2008
Posts: 967
have now further tweaked and reduced my volts sticking to 3.8ghz and am 9 hour prime stable @1.250 vcore!!!! temps now @ 41 idle and 74c max load small fft's for maximum heat power and stress etc running 8 stress threads !!!!

very impressed!!!
__________________
Lian Li V1000 Plus - Core i7 920-Rampage II X58-Watercooled With 2x Feser TFC Xchanger 120mm Rad, EK Supreme Acrylic CPU Block, Laing DDC-1T Ultra Alphacool Top XSPC Res-XFX GTX295 (Overclocked 680/1380/1100mhz) - 3x2GB (6GB Total) Corsair Dominator Triple Channel DDR3 1600mhz - Tagan Piperock 1100w PSU - OCZ Summit 120GB SSD (O.S) - 2x WD Velociraptors Raid-0 (Storage) -Windows 7 RC1 64Bit
Reply With Quote
  #33  
Old 19-12-08, 11:36 AM
monkey7 monkey7 is offline
OC3D Elite
 
Join Date: Jun 2008
Posts: 2,085
I'm jealous :P Have to put it to 1.35v @ 3.7gHz to make two F@H SMP and one F@H gpu client make 100% über stable.

Congratz on your overclock Are you going to try and get it at 4.0?
__________________






Reply With Quote
  #34  
Old 19-12-08, 12:59 PM
SwaleSmith SwaleSmith is offline
OC3D Crew
 
Join Date: Sep 2008
Posts: 967
Would need about 1.4v I reckon 3.8/3.9 is about the max have not persued more as i'd rathere run the lower safer and cooler voltage with a cost of 200mhz.

I would try it but would need better cooling it most likely hit 90c with 1.4v
__________________
Lian Li V1000 Plus - Core i7 920-Rampage II X58-Watercooled With 2x Feser TFC Xchanger 120mm Rad, EK Supreme Acrylic CPU Block, Laing DDC-1T Ultra Alphacool Top XSPC Res-XFX GTX295 (Overclocked 680/1380/1100mhz) - 3x2GB (6GB Total) Corsair Dominator Triple Channel DDR3 1600mhz - Tagan Piperock 1100w PSU - OCZ Summit 120GB SSD (O.S) - 2x WD Velociraptors Raid-0 (Storage) -Windows 7 RC1 64Bit
Reply With Quote
  #35  
Old 19-12-08, 01:33 PM
monkey7 monkey7 is offline
OC3D Elite
 
Join Date: Jun 2008
Posts: 2,085
Hmm 1.4v probably is probably not a good idea, and 90C isn't for sure. I'd stick with those 200 mHz less then
__________________






Reply With Quote
  #36  
Old 30-12-08, 02:22 PM
SwaleSmith SwaleSmith is offline
OC3D Crew
 
Join Date: Sep 2008
Posts: 967
Ok so heres my final overclock.

Rampage II X58 core i7 920 @3.8ghz 1.2500vcore.

Noctua cpu cooler (Nice Review Monkey7 ) 70c Prime small fft's max Load

36c Idle

Prime stable evidence below note the temp was when I was useing my ASUS triton 81 cooler therfore slightly hotter than my new noctua.
[IMG][/IMG]
__________________
Lian Li V1000 Plus - Core i7 920-Rampage II X58-Watercooled With 2x Feser TFC Xchanger 120mm Rad, EK Supreme Acrylic CPU Block, Laing DDC-1T Ultra Alphacool Top XSPC Res-XFX GTX295 (Overclocked 680/1380/1100mhz) - 3x2GB (6GB Total) Corsair Dominator Triple Channel DDR3 1600mhz - Tagan Piperock 1100w PSU - OCZ Summit 120GB SSD (O.S) - 2x WD Velociraptors Raid-0 (Storage) -Windows 7 RC1 64Bit
Reply With Quote
  #37  
Old 30-12-08, 02:26 PM
SwaleSmith SwaleSmith is offline
OC3D Crew
 
Join Date: Sep 2008
Posts: 967
Quote:
Originally Posted by name='Kempez'
Post your Core i7 OC's here!

Keep the format as below:

Make sure you include whether it was stable or not (with evidence - Prime95, Super PI 32m, F@H etc) and a CPU-z validation link.

Suicide shot

Stable

Stable with evidence

Example:

Code:
The Core i7 Extreme 940 (stock 2.94GHz)

Jim:

Core i7 EX 940: 7GHz (319 x 22) @ 1.0vcore, 1.1v FSB,  ASUS Rampage II Extreme Custom SS (Phase change)
Core i7 920 retail:

Mopnkey7

Core i7 920 retail: 3.80GHz (190*20) @ 1.3625 vCore, Gigabyte X58-UD5, Air cooled Noctua U12P SE1366

SuperPI time 11.000s, BSOD as soon as P95 started. No proof, as I lost the screenshots with the reinstallation of Vista.
Am i reading this right....7ghz with 1.0v vcore & stable!!!!! f'ing hell nice phase overclock jim!!!

what 3dm06 score do you get lol 35k
__________________
Lian Li V1000 Plus - Core i7 920-Rampage II X58-Watercooled With 2x Feser TFC Xchanger 120mm Rad, EK Supreme Acrylic CPU Block, Laing DDC-1T Ultra Alphacool Top XSPC Res-XFX GTX295 (Overclocked 680/1380/1100mhz) - 3x2GB (6GB Total) Corsair Dominator Triple Channel DDR3 1600mhz - Tagan Piperock 1100w PSU - OCZ Summit 120GB SSD (O.S) - 2x WD Velociraptors Raid-0 (Storage) -Windows 7 RC1 64Bit
Reply With Quote
  #38  
Old 17-01-09, 07:09 PM
SwaleSmith SwaleSmith is offline
OC3D Crew
 
Join Date: Sep 2008
Posts: 967
I have been doing some tweaking with my WC and have now reached 4.1ghz 24/7 stable

with 1.45 20x multi 205 bclk.

seems to have really given me a suprising boost in games wich are more cpu intensive FSX is flying now literaly
__________________
Lian Li V1000 Plus - Core i7 920-Rampage II X58-Watercooled With 2x Feser TFC Xchanger 120mm Rad, EK Supreme Acrylic CPU Block, Laing DDC-1T Ultra Alphacool Top XSPC Res-XFX GTX295 (Overclocked 680/1380/1100mhz) - 3x2GB (6GB Total) Corsair Dominator Triple Channel DDR3 1600mhz - Tagan Piperock 1100w PSU - OCZ Summit 120GB SSD (O.S) - 2x WD Velociraptors Raid-0 (Storage) -Windows 7 RC1 64Bit
Reply With Quote
  #39  
Old 03-03-09, 02:32 PM
filthy filthy is offline
Newbie
 
Join Date: Mar 2009
Posts: 6
Have you visited the AMD site where they are demonstrating teh Dragon stuff. They have some videos on the site and one shows them with a liquid helium cooled phenom o/c to 6GHz giving a 3dmark score of 45,000! Check it out.
Reply With Quote
  #40  
Old 16-07-09, 12:52 AM
Ghaz Ghaz is offline
Member
 
Join Date: Jun 2008
Posts: 104


I'm trying to get this to 4GHz on air. Will be lapping my processor and my heatsink soon, so hopefully I will get there, as I am only 110MHz off
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump






All times are GMT. The time now is 11:52 AM.
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.