Average Temps

[NewB1e]

I just finish building a computer and when i finished building my display wasnt working and everything was spinning fast and i fixed the problem with the display. And plugged these cords that werent in before to fix the display and after that i turned my computer bak on and my fans graphics card and cpu were not spinning as fast as they were before is this normal?? aslo after i got into my BIOS and went to cpu temp that was at 39 degrees celcius which said 102 and my M/B temp said about 33 degrees which was at 91 i was just wondering is this were normal temps for the cpu and stuff none of the stuff is OC any help would be appreciated thanx.

[Hassan]

post you specs here.

[NewB1e]

Core 2 Quad Q9550 Yorkfield 2.83GHz 12MB L2 Cache

G.SKILL 4GB (2 x 2G 240-Pin DDR2 SDRAM DDR2 1066 (PC2 8500) Dual Channel Kit Desktop Memory

OCZ GameXStream OCZ600GXSSLI 600W ATX12V SLI Certified CrossFire Ready Active PFC

ASRock P45R2000-WiFi LGA 775 Intel P45 ATX Intel Motherboard

APPHIRE 100242L Radeon HD 4850 512MB 256-bit GDDR3 PCI Express 2.0 x16 HDCP

(3) Seagate Barracuda 7200.11 ST3500320AS 500GB 7200 RPM 32MB Cache SATA 3.0Gb/s Hard Drive - OEM

Blackmagic intensity

i had a little question bout this the other cus i had a problem with my display but i forgot the pw to that account but yea thats wat i have installed

[agentx]

mobo temp is ok as for the cpu are u using the stock cooler or an aftermarket

[NewB1e]

Im using the stock cooler before i put those plugs into the 12v connector all of the stuff was spinning fast but now there not spinning that fast

[agentx]

sry but wat cable exactly did u plug into to get the monitor working. if it was a power cable to the gfx card (i.e pci power cord) im not sure but it might be that there is less power or the fans are being controlled but the bios and will only go faster if the parts get hotter. (i cant say for certain though)

[NewB1e]

umm i plug 2 of them in one was labled cpu 1 and cpu 2 they were on my power supply i plug them into the 12v connector on my mobo but before they were plug in i had no display and the fans were spinning real fast. After i plugged them up my fans on my stuff were not spinning as fast so thats y i was wondering about wat is the average temp my cpu and stuff should be running on before i start using it.

[agentx]

OH those connectors. alright well ur temps are fine but if they get hotter and the fans dont go faster u'll have to get a program like fanspeed to manually adjust them.

[Zoot]

My overclocked Q9450 idles at around 27C and the maximum temperature I saw after a 48hr stint of Prime95 was 55C.

If you want to lower your temperatures a bit a great thing to do is undervolt the CPU.

[agentx]

ya or buy a aftermarket cooler