Go Back   Overclock3D Forums > [OC3D] Processors & Platforms > Overclocking
Reply
 
Thread Tools Display Modes
 
  #1  
Old 11-09-04, 12:10 PM
Brwmogazos Brwmogazos is offline
Advanced Member
 
Join Date: Mar 2004
Posts: 441
Super Pi Challenge for Dazboots...Everyone else welcome too :-)



been away for a while and i noticed there has been a thread where it seems that you got some very interesting Super Pi scores

therefore i digged out some old benchies of mine for both 1mb and 8mb runs.

I remember you saying that you liked the 8mb run as it proves your rig is stable enough so i have included that too.

Since you like challenges and being on top heres one for you.

few runs at "just" 4600mhz that i found for both 1mb and 8mb.

I was experimenting with Vcore too and my 3700EB memory.The sticks are running at 2.5 2 2 5 and everything else to Auto so theres plenty of improvement to come i would guess.

The board is the IC7-MAX3 without any mods whatsoever.I havent bothered for now so the Vdimm stays at 2.8 where the VTT tracks properly however it is whats holding me back as my ram used to run @ 3V and 253fsb 2.5 2 2 5 something not possible nowdays with such a low VTT

Anyways....

Lets go then...Show me your Super Pi 1mb and 8mb runs guys this is an open challenge

1MB



8MB



Remember in the 8mb run we will be able to see more accurate results as in the 1mb runs there are no decimal places in the final result so the difference between two rigs will be clearly seen in higher MB runs

__________________


^^14-07-2004^^Prescott skt 478 D0 @306FSB 1.632V
Reply With Quote
  #2  
Old 11-09-04, 11:03 PM
fatty fatty is offline
OC3D Elite
 
Join Date: May 2004
Posts: 1,630
ok think I might have got it??

Reply With Quote
  #3  
Old 12-09-04, 10:44 AM
Brwmogazos Brwmogazos is offline
Advanced Member
 
Join Date: Mar 2004
Posts: 441


hehe proof

guess what ....

my MAX 3 hasnt got a serial port...so my US robotics 56K external modem cannot be connected...therefore i need to search for a converter...so...it may take a while till next time i have internet access... ...

well see...am on my bros pc now but he is leaving for the UK tomorrow and is taking his pc with him...
__________________


^^14-07-2004^^Prescott skt 478 D0 @306FSB 1.632V
Reply With Quote
  #4  
Old 26-09-04, 03:15 PM
boardy boardy is offline
OC3D Elite
 
Join Date: Mar 2004
Posts: 1,150
Here's mine. Had loads of things running in the background cos I was using it for a stability test really.

1Mb



8Mb

__________________
At absalute zerro all moleculer motion stops, and you can hear a Canadian say: "Think I may need a coat!"

Benching - CPU's = E6600 & Q6600 G0 SLACR / Mobo's = P5B "Vanilla" (stock) & P5WDH-D (fully vModded) / RAM = 1Gb PC5300 Crucial Ballistix Tracers & 1Gb Team Xtreem PC6400 custom / HDD = 160Gb IDE Cudda



(highest rank ever: 25th at 05 Nov 2006 12:30, most hwboints ever: 127.6 points at 05 Nov 2006 12:30)
Reply With Quote
  #5  
Old 22-11-04, 10:02 AM
Dazboots Dazboots is offline
Advanced Member
 
Join Date: Apr 2004
Posts: 372
[QUOTE=Brwmogazos]

been away for a while and i noticed there has been a thread where it seems that you got some very interesting Super Pi scores

therefore i digged out some old benchies of mine for both 1mb and 8mb runs.

I remember you saying that you liked the 8mb run as it proves your rig is stable enough so i have included that too.

Since you like challenges and being on top heres one for you.

few runs at "just" 4600mhz that i found for both 1mb and 8mb.

I was experimenting with Vcore too and my 3700EB memory.The sticks are running at 2.5 2 2 5 and everything else to Auto so theres plenty of improvement to come i would guess.

The board is the IC7-MAX3 without any mods whatsoever.I havent bothered for now so the Vdimm stays at 2.8 where the VTT tracks properly however it is whats holding me back as my ram used to run @ 3V and 253fsb 2.5 2 2 5 something not possible nowdays with such a low VTT

Anyways....

Lets go then...Show me your Super Pi 1mb and 8mb runs guys this is an open challenge

1MB

http://briefcase.pathfinder.gr/downl...4/0/28secs.jpg

8MB

http://briefcase.pathfinder.gr/downl.../0/516+8mb.jpg

Remember in the 8mb run we will be able to see more accurate results as in the 1mb runs there are no decimal places in the final result so the difference between two rigs will be clearly seen in higher MB runs

sorry m8 just smashed ur scre with 4 min 55 seconds.

will post screenies later.

just running 32 meg for pure stability.

will post results when they come in.......... yawn this is a long run....

http://img111.exs.cx/img111/1010/best.png 32 meg in 23 min 17 seconds.
__________________
amd fx60 @ 3150 ghz both cores.

custom watercooling thermochill 120.3 pa.

swiftech storm cpu block.

dangerden 655 pump.

2x x1900 crossfire cards watercooled dangerden maze 4.

16 tweakmonster heat sinks.

2 gig corsair 3500 pro ll memory.

dfi rdx200 motherboard.

mountain mods revision 2 case from usa

with 7 inch tft inside.

xfi soundcard. and i truigue 5.1 speakers.

dell 3007 30 inch tft widescreen.

fps 700 watt psu and tagan 380 watt psu.

10x akasa ultra quiet 120 mm fans amber.
Reply With Quote
  #6  
Old 29-11-04, 07:52 PM
Animal Animal is offline
Advanced Member
 
Join Date: Mar 2004
Posts: 439
I run 31s flat on a stock FX-55
Reply With Quote
  #7  
Old 30-11-04, 06:56 PM
fatty fatty is offline
OC3D Elite
 
Join Date: May 2004
Posts: 1,630
ok 30 seconds with my 3500 newcastle

Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump






All times are GMT. The time now is 11:15 AM.
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.